Znap Coin Poket 3D Printer Model
The file 'Znap Coin Poket 3D Printer Model' is (stl) file type, size is 77.6KB.
The file 'Znap Coin Poket 3D Printer Model' is (stl) file type, size is 77.6KB.
Large coin pocket for Znap slim wallets. It can hold atleast 12 50cent coins (the thickest) plus some minor coins like 10 cent coins. The model is made to be printed in place, the tolerances to clear are 0.3mm. It takes the space of 2 credit cards, so if you have the 12 cards model (like me) you'll hold max 10 cards plus the coin pocket. The coin door is made so that it stays closed when the pocket is fully inserted, to open it you need to raise the pocket a little bit (like you do when scrolling through the cards) and then you can slide the coin door open. When done slide it back to make it flush with the surface and push back the coin pocket.
| Case_Component3.stl | 337.6KB |
