ZMP OMP Tilt Camera Front Plate 3D Printer Model
The file 'ZMP OMP Tilt Camera Front Plate 3D Printer Model' is (stl) file type, size is 209.7KB.
The file 'ZMP OMP Tilt Camera Front Plate 3D Printer Model' is (stl) file type, size is 209.7KB.
ZMO Tilt camera front plate, to allow a servo to tilt the FPV camera. Should fit the Vista and O3 Cameras. There is a bearing on the opposite side of the servo control arm to remove camera vibration. You don't need the bearing, but it helps keep jello out of the feed. I used a E-MAX ES08 Servo with the standard 1 arm attach horn.
Supports are needed, and I used 15% infill. I used PLA+, but PETG would work too. TPU will not work.
Bearing Pin: https://www.amazon.com/dp/B07Y4X33VT?ref=ppx_yo2ov_dt_b_product_details&th=1
Bearing: https://www.amazon.com/dp/B07FW18RQY?psc=1&ref=ppx_yo2ov_dt_b_product_details
| ZMO_Tilt_Camera_Bearing_Arm.stl | 327.9KB | |
| ZMO_Tilt_Camera_Plate.stl | 2.1MB |
