Basically a remix, but I completely redesigned the original object for being toolless and simplify the printing process. It doesn't require support, plus is easy to place and remove by rotating it at 90°.
A little warning though, the T hook can be fragilized if you rotate it too much times. If it's too hard to put in place (making it brake, or vice versa), scale the object down or up by increments of 0.01%.
It should fit well with PETG (as the red one in the photo).
Designed for 20XX extrusion profiles.
Ø 0.4 nozzle recommended settings :Max layer height : 0.15
Wall lines : 3 (1.2 mm)
Infill : 100%
| Zip_tie_mount_anchor-v1.stl | 184.2KB | |
| Zip_tie_mount_anchor-v1_holed.stl | 195.2KB | |
| Zip_tie_mount_anchor-v2.stl | 374.9KB | |
| Zip_tie_mount_anchor-v2_hole.stl | 371.4KB |
