Zip Tie Bracket – Updated Again 3D Printer Model
The file 'Zip Tie Bracket – Updated Again 3D Printer Model' is (stl) file type, size is 27.0KB.
The file 'Zip Tie Bracket – Updated Again 3D Printer Model' is (stl) file type, size is 27.0KB.
I wanted to use zip ties to hold something up, but lacked a bracket to attach it to.
Time for a design moment. It's really simple, and not an exciting build, but I found it uesful, and thought I'd share it.
You can use double-sided tape to stick these to a well-cleaned wall/car surface/whatever, and then thread your zip-tie through any of the slits on the bracket to hold it in place.
There are now more STLs, 2, 2.5 and 3 cm square. Obviously you can re-size them as you wish - many slicers will let you resize the objects.
My photo make it look a bit rough, as I've printed these fairly small items through a 0.6 nozzle at a 0.46 layer height.
UPDATE OF THE UPDATE
I have changed the files on the collection here: I have been playing about with minimising the size of the stls without loss of detail. The newest ones are 9K each. The angle is better again for threading.
Resize it at your leisure!
| Zip_tie_mount_2x2.stl | 14.3KB | |
| Zip_tie_mount_3.stl | 14.3KB | |
| Zip_tie_mount_4.stl | 19.2KB | |
| Zip_tie_mount_5._25mm_stl.stl | 8.7KB | |
| Zip_tie_mount_5._30mm_stl.stl | 8.7KB | |
| Zip_tie_mount_5_20mm.stl | 8.7KB |
