Modular zip / cable tie organizer. You can store cca. 100pcs of ties in each box.(tested)
Added tight fit version of stands (T in file name)
Box stl files are named according to target zip tie length (they are 20% smaller)
I added .f3d with full history so you can adjust any predefined parameters like walls width, height, corner diameters, clearances etc.
With right flow setup it will stick nicely.(I printed it for testing reasons with stock E3 V2 and Marlin)
There is anti elephant foot chamfer but check it and eventually clean.
Fixed problem in calculation by using wrong variable which caused problems for last column/row cell. All credits to @kekemui. Sorry for this.
Added tight and loose version of stands.
| Box_100.stl |
| Box_120.stl |
| Box_150.stl |
| Box_200.stl |
| Box_60.stl |
| Box_80.stl |
| Stand_2x1.stl |
| Stand_2x2.stl |
| Stand_3x1.stl |
| Stand_3x2.stl |
| Stand_3x3.stl |
| Stand_4x1.stl |
| Stand_4x2.stl |
| Stand_4x3.stl |
| Stand_5x1.stl |
| Stand_5x2.stl |
| Stand_5x3.stl |
| Stand_6x1.stl |
| Stand_6x2.stl |
| Stand_6x3.stl |
| Stand_7x1.stl |
| Stand_7x2.stl |
| Stand_8x1.stl |
| Stand_8x2.stl |
| Stand_T_2x1.stl |
| Stand_T_2x2.stl |
| Stand_T_3x1.stl |
| Stand_T_3x2.stl |
| Stand_T_3x3.stl |
| Stand_T_4x1.stl |
| Stand_T_4x2.stl |
| Stand_T_4x3.stl |
| Stand_T_5x1.stl |
| Stand_T_5x2.stl |
| Stand_T_5x3.stl |
| Stand_T_6x1.stl |
| Stand_T_6x2.stl |
| Stand_T_6x3.stl |
| Stand_T_7x1.stl |
| Stand_T_7x2.stl |
| Stand_T_8x1.stl |
| Stand_T_8x2.stl |
| Tie_Dispenser_Stand_Tight_v1.f3d |
| Tie_Dispenser_v8.f3d |
