Zinogre / Jinouga – Monster Hunter W/ Removable Tail 3D Printer Model
The file 'Zinogre / Jinouga – Monster Hunter W/ Removable Tail 3D Printer Model' is (stl) file type, size is 7.4MB.
The file 'Zinogre / Jinouga – Monster Hunter W/ Removable Tail 3D Printer Model' is (stl) file type, size is 7.4MB.
Meet Zinogre, he's quite shocking. Zinogre is from the game series Monster Hunter. In the Japanese versions he is also known as Jinouga. So I start with a model intended for XNALaura found here > https://rough-chrysalis.deviantart.com/art/Zinogre-and-Stygian-Zinogre-XNAlara-710781130
I imported it into Blender, did some editing, made a new pose, then run through netfabb, edited some more in blender, then sliced in meshmixer. I also included a whole version with high and low poly counts. The low poly is the smaller one
To print you will need supports. For DnD, Pathfinder, or 28mm scale, you will need to scale it to 125% for accurate scale. Though at 100% it fits a Gargantuan base well. In monster hunter size is variable so its up to you. Tail pin will probably need to be scaled down. The Zinogre pictured is scaled 125%, the tail pin is 100%. The base will need scaled to 100% for Gargantuan. I used Solutech White Pla on the large model, and I used Dazzle Light white pla on the smaller one. Both printed on Alunar M505 0.2mm layer height. I hope ya'll enjoy.
I also found some 5th edition stats for various monsters here > https://www.reddit.com/r/DnD/comments/86bl8s/5eochomebrew144_page_monster_hunter_series/?utm_source=reddit-android
| miniaturebase.stl | 213.6KB | |
| zinorgebody.stl | 7.3MB | |
| zinorgetail.stl | 817.8KB | |
| zinorgetailpin.stl | 46.0KB | |
| zinorgewholehighpoly.stl | 7.4MB | |
| zinorgewholelowpoly.stl | 313.8KB |
