Yes - LandShark - here it is.
Examples Images of the LandShark above (sorry for the quicky build).
This is a set of Struts that I composed. These are 3D shaped , in contrast to the Meccano Parts that are 2D in that they are Flat / paper-like based. They are still compatible with the Meccano and Motor Converter Parts that I posted here on other Pages.
Parts included are: Motor Gear Mounts, Motor Mounting Sleeves, Jaws, ClawNails, Feet, Curves, etc.
Please excuse the last photo, but my daughter insisted.
Also look for: SHARKOCTOPUS Robotic , ROBOSHARK.
These are compatible with the Meccano and Motor Parts (as mentioned earlier) , including:
for additional parts.
| Gear16T_GRJNTXY_Plane_27x24x9_012g_.stl | 72.2KB | |
| Gear16T_MTRMNT_hols_bk_28x26x20_009a.stl | 51.8KB | |
| Gear16T_MTRMNT_hols_fr_28x24x20_007a.stl | 42.3KB | |
| M1_PLATETRIANGLE_4x4x0_46x40x2_p027a.stl | 50.8KB | |
| M1_PLATETRIANGLE_6x3x0_60x30x2_p055a.stl | 35.2KB | |
| M1_StripANGLE_135d_2x1a1_20x10x10_p057a.stl | 12.7KB | |
| M1_StripANGLE_1x1a1_11x10x11_p126a.stl | 6.1KB | |
| M1_StripANGLE_1x2a2_13x21x13_p025a.stl | 20.6KB | |
| M1_StripANGLE_45d_2x1a1_20x10x10_p056a.stl | 15.6KB | |
| RSM_CURVE_X1Y1XY1Z3_2x2x1_19x19x8_p016a_.stl | 59.1KB | |
| RSM_CURVE_X1Y1XY1Z3_2x2x1_21x21x8_p015a_.stl | 53.0KB | |
| RSM_Foot_X4Y1Z3_4x1x2_42x10x20_p025a.stl | 137.6KB | |
| RSM_JAWLeft_Long_X2Y1Z1_6x2x1_61x26x13_p023a.stl | 57.7KB | |
| RSM_JAWRight_Long_X2Y1Z1_6x2x1_61x26x13_p024a.stl | 63.7KB | |
| RSM_Nail_X1Y1Z1_2x1x1_22x10x10_p026a.stl | 40.9KB | |
| RSM_STRUT_X0Y11Z0_6x1x1_58x8x5_p0010a_.stl | 42.0KB | |
| RSM_STRUT_X0Y5Z0_5x1x1_48x8x5_p004a.stl | 21.6KB | |
| RSM_STRUT_X0Y7Z0_4x1x1_38x8x5_p0027a_.stl | 26.4KB | |
| RSM_STRUT_X4Y4Z0_4x1x1_45x8x8_p009b_.stl | 99.6KB | |
| RSM_STRUT_X6Y5Z2_6x1x1_60x8x8_p028a.stl | 80.8KB | |
| RSM_STRUT_X8Y7Z2_8x1x1_80x8x8_p011b_.stl | 163.2KB |
