Hi my name is Zander, for the last few weeks iv built three model rockets using 3D Printing. Why? Because rockets are incredibly cool! This is the third revision and the first public version. The rocket uses 1 C6-7 Rocket Motor. This rocket does not need any superglue unless you add a parachute, or Glue the motor to the engine compartment and the EC to the Body tube(Adds more safety and makes the craft more rigid Recommended). The craft fly's very stable at high speeds. The Center of mass is also quite low which means you can put weight anywhere above the Engine Compartment without messing it up, and giving the rocket even better flight characteristics! So feel free to stick in a parachute and some altimeters and have fun!
BTW the circuit diagram is for a igniter if you are interested. I left out resistor values for the led is 360Ohm.
| Engine_And_CS_Compartment.stl | 84.8KB | |
| Launch_Lug.stl | 37.0KB | |
| Nose_Cone.stl | 52.4KB | |
| Rocket_Preview.stl | 261.9KB | |
| Shell.stl | 28.2KB |
