Zeus And The Giants (Stone Carving) – Hueforge Print 3D Printer Model
The file 'Zeus And The Giants (Stone Carving) – Hueforge Print 3D Printer Model' is (hfp,txt,stl) file type, size is 47.6MB.
The file 'Zeus And The Giants (Stone Carving) – Hueforge Print 3D Printer Model' is (hfp,txt,stl) file type, size is 47.6MB.
Zeus and the Giants
This was printed with a 0.2 nozzle, which produces 0.04mm layers a little nicer. It is possible with a 0.4 nozzle, though you will need to have calibrated your printer and filaments very carefully.
You can however, still print this with a 0.4 nozzle and change the layer height to 0.08mm, by just adjusting the .hfp file.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA Siddament Black Transmission Distance: 0.2
PLA+ Sunlu Coffee Transmission Distance: 3
PLA Sunlu Beige Transmission Distance: 8.2
PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
Start with Black
At layer #24 (1.08mm) swap to Coffee
At layer #28 (1.24mm) swap to Beige
At layer #43 (1.84mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
| ZEUS_AND_THE_GIANTS.hfp | 2.0KB | |
| ZEUS_AND_THE_GIANTS_describe.txt | 536.0B | |
| ZEUS_AND_THE_GIANTS_Front_150x102.stl | 146.6MB |
