ZeroDock Display Mount (Raspberry Pi Zero) 3D Printer Model
The file 'ZeroDock Display Mount (Raspberry Pi Zero) 3D Printer Model' is (3mf,stl) file type, size is 98.0KB.
The file 'ZeroDock Display Mount (Raspberry Pi Zero) 3D Printer Model' is (3mf,stl) file type, size is 98.0KB.
A screen display mount for the ZeroDock Station. This mount is designed to hold a 2" screen display by default, but I've included the 3mf file so you can adjust the size to fit your needs. The mount is designed to slide into the ZeroDock station and hold the screen in place.
ZeroDock Station:
https://www.pishop.us/product/zerodock/
Raspberry Pi Zero 2 W:
https://www.pishop.us/product/raspberry-pi-zero-2-w-with-pre-soldered-headers/
Waveshare General 2inch IPS LCD Display Module (240×320):
https://www.pishop.us/product/240-320-general-2inch-ips-lcd-display-module/
All angles are 45 degrees to ensure a clean print without supports. The print takes around 45 minutes and uses approximately 7g of filament at 50% infill.
See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing
| ZeroDock-Display-Mount.3mf | 20.2KB | |
| ZeroDock-Display-Mount.stl | 230.0KB |
