I have not printed this yet, It should work but if there is any issues please let me know.
At 100% scale the parts do not fit on a normal sized bed. Parts 3 and 7 end up being 624mm long. I would recommend splitting the models up further or printing them at 30 to 40% scale to make all parts printable on 200mm x 200mm machines.
Part 3 did not sit fully flat, so I adjusted it and uploaded it as 3.1
Parts 1-3 where the same asd 5-7. Removed 5-7.
| Part_1.stl | 7.4KB | |
| part_10_repaired_attach_to_9.stl | 26.8KB | |
| part_11.5_repaired.stl | 25.4KB | |
| part_11_repaired.stl | 26.7KB | |
| part_12_repaired.stl | 8.7KB | |
| part_13_repaired.stl | 8.5KB | |
| part_14_repaired.stl | 11.8KB | |
| part_15.5_repaired.stl | 91.6KB | |
| part_15_repaired.stl | 92.0KB | |
| part_16_repaired.stl | 11.6KB | |
| part_17_repaired.stl | 17.8KB | |
| part_18_repaired.stl | 26.8KB | |
| part_19_repaired.stl | 33.9KB | |
| part_20_repaired.stl | 107.7KB | |
| part_21_repaired.stl | 32.3KB | |
| part_22_repaired.stl | 17.5KB | |
| part_23_repaired_x4.stl | 1.1KB | |
| part_24.stl | 1.6KB | |
| part_25_repaired.stl | 26.8KB | |
| part_26_repaired.stl | 18.7KB | |
| part_27_repaired.stl | 18.1KB | |
| part_28_repaired_repaired.stl | 38.5KB | |
| part_29_repaired_repaired.stl | 39.1KB | |
| part_2_repaired.stl | 1.3KB | |
| part_3.1_repaired.stl | 388.7KB | |
| part_30_repaired.stl | 11.9KB | |
| part_31_repaired.stl | 11.9KB | |
| part_3_repaired.stl | 69.6KB | |
| part_4_x8_repaired.stl | 2.2KB | |
| part_8_repaired.stl | 23.0KB | |
| part_9_repaired.stl | 9.5KB |
