Z-Axis Limit Switch Mount For 2020 Extrusion 3D Printer Model
The file 'Z-Axis Limit Switch Mount For 2020 Extrusion 3D Printer Model' is (STL) file type, size is 159.9KB.
The file 'Z-Axis Limit Switch Mount For 2020 Extrusion 3D Printer Model' is (STL) file type, size is 159.9KB.
A custom mount for the Z-axis limit switch, designed to fit into 2020 extrusion. The stock mount on the Elegoo Neptune 2S that I use did not have the range of adjustment needed to easily install a glass bed, so this new mount solves that by moving the mounting points into the nearby rail section. You can then move the mount up and down along the rail to adjust the "bottom" of the build volume. I used 2 additional M4 x 12 socket head screws to mount it, but I have also included a slightly bulkier file that uses the stock fasteners used on the stock mount. Print the included T-nuts (105-108% scale) to secure the mount to the rail.
| M4_x_0.7_T-Nut.STL | 407.2KB | |
| Z-Axis_Limit_Switch_Rail_Mount_M4_x12.STL | 111.0KB | |
| Z-Axis_Limit_Switch_Rail_Mount_Stock_Fasteners.STL | 110.9KB |
