Z-6 Jetpack
JT-12 Jetpack
Parts listed with an "A" at the end are the JT-12 parts to be printed in place of the original piece.
:::UPDATED 11/11/20:::
1.) Adjusted the top notches to be thicker as per accuracy
2.) Added a raised section at the end of the notches attached to the middle tank as per accuracy
3.)Thrusters have been updated to be more modular they now have inserts for the look they already have or the look that we can clearly see on the z-6 when Cobb Vanth is wearing it. In addition the vent at the bottom has been rotated and edited for accuracy. Cobb Vanth rocket and patch located at. https://www.thingiverse.com/thing:4645655
| B_1.stl | 168.4KB | |
| B_2.stl | 150.1KB | |
| B_3.stl | 168.4KB | |
| B_4.stl | 150.1KB | |
| C_B_10.stl | 194.9KB | |
| C_B_2.stl | 5.4KB | |
| C_B_3.stl | 41.6KB | |
| C_B_4.stl | 41.6KB | |
| C_B_5.stl | 52.5KB | |
| C_B_6.stl | 52.5KB | |
| C_B_7.stl | 151.4KB | |
| C_B_8.stl | 151.2KB | |
| C_B_9.stl | 195.7KB | |
| G_1.stl | 2.0MB | |
| G_2.stl | 367.3KB | |
| G_3.stl | 75.6KB | |
| G_4_A.stl | 10.9KB | |
| G_5_A.stl | 10.9KB | |
| G_V.stl | 145.6KB | |
| JT-12_Full_Construct.stl | 14.4MB | |
| JT-12_Main_Body.stl | 3.0MB | |
| NR_JT12-2.stl | 2.8KB | |
| NR_JT12.stl | 2.8KB | |
| N_L.stl | 21.8KB | |
| N_R.stl | 21.8KB | |
| N_R_L.stl | 3.3KB | |
| N_R_R.stl | 3.3KB | |
| P_1_A.stl | 684.0B | |
| P_2_A.stl | 684.0B | |
| P_3_A.stl | 684.0B | |
| P_4_A.stl | 684.0B | |
| P_5_A.stl | 684.0B | |
| P_6_A.stl | 684.0B | |
| P_7_A.stl | 53.5KB | |
| P_8_A.stl | 53.8KB | |
| P_9_A.stl | 51.4KB | |
| RT_1.stl | 950.2KB | |
| RT_1_A.stl | 1.2MB | |
| RT_2.stl | 132.1KB | |
| RT_3.stl | 217.8KB | |
| RT_4.stl | 186.3KB | |
| RT_4_A.stl | 194.5KB | |
| RT_5.stl | 950.2KB | |
| RT_5_A.stl | 1.2MB | |
| RT_6.stl | 132.1KB | |
| RT_7.stl | 218.1KB | |
| RT_8.stl | 186.3KB | |
| RT_8_A.stl | 194.5KB | |
| R_1.stl | 169.7KB | |
| R_1_A.stl | 1.2MB | |
| R_2.stl | 984.5KB | |
| R_2_A.stl | 36.0KB | |
| R_3.stl | 393.2KB | |
| R_3_A.stl | 36.0KB | |
| R_4.stl | 1.4MB | |
| R_5.stl | 36.0KB | |
| R_6.stl | 36.0KB | |
| T_1.stl | 79.7KB | |
| T_2.stl | 128.2KB | |
| T_2_A.stl | 237.8KB | |
| T_3_A.stl | 268.3KB | |
| T_4.stl | 718.9KB | |
| T_5.stl | 79.7KB | |
| T_6.stl | 128.2KB | |
| T_6_A.stl | 240.0KB | |
| T_7_A.stl | 268.3KB | |
| T_8.stl | 719.0KB | |
| T_L_p1.stl | 1.5MB | |
| T_L_p2.stl | 138.4KB | |
| T_L_p3.stl | 261.3KB | |
| T_R_p1.stl | 1.5MB | |
| T_R_p2.stl | 138.4KB | |
| T_R_p3.stl | 261.3KB | |
| Z-6_Full_Construct.stl | 18.4MB | |
| Z-6_Main_Body.stl | 2.9MB |
