PROPERTY OF MIHOYO. USED WITHOUT PERMISSION.

yukong printed (almost) perfectly. one of her ears cracked, but was easily repaired with white wood filler. i added a 'hair spanner' object to fill the void between her bangs and main hair for cleaner slicing. i also thickened her eyes since star rail characters have thinner 'coin' eyes (and deeper eye sockets).

the draping fabric on her legs was removed for easier printing at 1:4. her arm fabric stayed. some accessories were excluded but should still be available in the BLEND. do check them out before printing however, since i can't recall which ones i finished restoring and which ones i didn't.

i ordered some cheap metal files from aliexpress, so that should help with the sanding/finishing. i might even pick up a light tinted primer/sealer if i can find one that works well on these prints.

anyways, cammy, shermie, vanessa, and tira will be posted soon.

don't forget to HOLLOW your STL in prusaslicer. i'm using 2.3mm walls, 0.9 precision and 1.8mm closing distance for 1:4 in case anyone is interested.

printed at 0.5mm layer heights with 2.0s exposure in anycubic standard white (new formula - soft bag) resin.

one more thing!!! add plenty of holes after hollowing. these aren't just for drainage but also to RELIEVE THE PRESSURE on the FEP film. don't just add holes to the legs when printing head-first... add several holes throughout which can easily be filled (with wood filler) and sanded down.