Yuki Air Cooler 3D Printer Model
The file 'Yuki Air Cooler 3D Printer Model' is (STL,SLDPRT,zip) file type, size is 43.4MB.
The file 'Yuki Air Cooler 3D Printer Model' is (STL,SLDPRT,zip) file type, size is 43.4MB.
I recommend using the Print Files (gcodes), adjust bed and nozzle temperature once the print starts to fit your filament needs
Printer requirements:
0.6mm nozzle with at least 200x200x200mm build volume
body.gcode , uphere_body.gcode:
Two versions of Yuki's body, "body.gcode" fits any 120mm pc fan, "uphere_body.gcode" is specific for "Uphere 120mm pc fan". Run a "5V Uphere USB 120mm fan" at up to 12V with a "usb fan speed controller" to get maximum airwflow at low noise. Prints with 170g of PLA in 11h. Ender 3 v2 gives the best outer surface smoothness. Get original Yuki color with "Xightongzhilian silk blue PLA"
cap.gcode:
Prints with 25g of Polipropylene in 1h45m. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP
icepack.gcode:
Prints with 100g of Polipropylene in 8h. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP
Website: https://www.riverfamily.art/
Video: https://www.youtube.com/watch?v=TAI5tish3BI
Slicing video: https://youtu.be/3wivfIi9iO4
Contact: [email protected]
| body.STL | 4.7MB | |
| body_uphere.STL | 4.9MB | |
| cap.STL | 140.7KB | |
| icepack.STL | 1.4MB | |
| Yuki.SLDPRT | 7.3MB | |
| Yuki_Print_Files.zip | 31.7MB |
