I had been looking for a YT-2400 to print out and use as terrain for my roleplaying group, and was just not satisfied with what I found, so I took the dimensions from YT-2400 (Outrider) by the24hrpartyzone and remodeled it based on my own whims. Fortunately with all the different depictions of star wars ships you can pretty much choose what features you like and mash them together into one ship! And wow, hull panels are a pain to draw!
Multiple parts:
p03 x2
p05 x4
p06 x2
p08 x3 (back and side landing gear bays)
p08f x2 (front landing gear bay, will need a bit of sanding on the front to fit)
p07 x5 (if you wish to use metal rods for the landing gear)
or if you want fully 3d printed landing gear, that can be reinforced with a 2mm rod
a1_1976 x1 (side)
a1_1691 x2 (back)
a1_2350 x2 (front)
| yt-2400.dwg | 2.3MB | |
| yt-2400.pdf | 259.2KB | |
| yt-2400.stl | 29.4MB | |
| yt2400-a1_1691.stl | 1.4MB | |
| yt2400-a1_1976.stl | 1.4MB | |
| yt2400-a1_2350.stl | 1.4MB | |
| yt2400-p01-bot.stl | 4.8MB | |
| yt2400-p01-bota.stl | 4.3MB | |
| yt2400-p01-botb.stl | 560.0KB | |
| yt2400-p01-mid.stl | 2.6MB | |
| yt2400-p01-mida.stl | 177.0KB | |
| yt2400-p01-midb.stl | 2.4MB | |
| yt2400-p01-top.stl | 5.0MB | |
| yt2400-p01-topa.stl | 4.5MB | |
| yt2400-p01-topb.stl | 596.6KB | |
| yt2400-p02.stl | 8.7MB | |
| yt2400-p03.stl | 423.6KB | |
| yt2400-p04.stl | 336.4KB | |
| yt2400-p05.stl | 286.0KB | |
| yt2400-p06.stl | 3.0MB | |
| yt2400-p07.stl | 1017.1KB | |
| yt2400-p08-f.stl | 593.5KB | |
| yt2400-p08.stl | 640.8KB |
