The file 'Yomi Air Purifier 3D Printer Model' is (3mf,gcode,SLDPRT,STL) file type, size is 569.7KB.
Video: https://youtu.be/dZVi3gWxYYk
Fits Noctua NF-A20 5V USB pc fan
Remove the fan frame with pliers
Then remove Noctua adhesive and attach the fan mid-print with “thick double sided adhesive tape”
Add a “usb fan speed controller” to adjust and increase fan speed.
Cut hepa filters from a "Frameless hepa filter" (Google it)
Cut activated carbon filter from an “Activated carbon air filter sheet”:
__Use the universal Yoni.gcode print file instead of slicing. Upload the gcode on an SD card and insert it in any printer. Launch the gcode from the printer interface. Adjust temperature once the print starts to fit your filament needs.
Printer requirements for the gcode: 0.6mm nozzle and at least 210x210mm buildplate__
Airflow demo and measurement video: https://www.youtube.com/watch?v=7Cs-kMmjAmg
Slicing settings:
Insert pause at z = 44mm
Global:
layer height: 0.3mm
infill line width: 1.2mm
infill pattern: grid
infill density: 25%
infill line direction: 0°
walls: 0
bottom layers: 0
top layers: 0
Yoni 2:
walls: 1
infill pattern: rectilinear
infill density: 100%
infill/wall overlap: 90%
| Yoni.3mf | 110.2KB | |
| Yoni.gcode | 2.9MB | |
| Yoni.SLDPRT | 110.6KB | |
| Yoni_1.STL | 338.3KB | |
| Yoni_2.STL | 84.5KB |
