Yogurt/salad Cup With Lid For Topping. And Spoon 3D Printer Model
The file 'Yogurt/salad Cup With Lid For Topping. And Spoon 3D Printer Model' is (stl) file type, size is 4.7MB.
The file 'Yogurt/salad Cup With Lid For Topping. And Spoon 3D Printer Model' is (stl) file type, size is 4.7MB.
A container for yogurt (or other creamy solids), salads, or the like. Has a divider for included spoon and a top lid for toppings.
The container total is 15cm x 8,7cm. The main container is 9cm and the top container 5cm.
Please note: While I've done what I can to make a tight fit (tight threads and more), the container is NOT completely watertight. It WILL drip after a bit no matter how tight you close the lid. That being said, I've used it for yogurt and other more creamy, solid stuff for a while now, and that works just fine :-)
No parts other than the spoon (see below) needs supports.
AS for the spoon, printing it can be difficult since it needs to be standing upright, and using support will fill the base thread/hole with support filament. Using a Brim, distance 0, might help. If you use Cura Slicer, install the amazing 'Cylindric Custom Support' by 5Axes, and use the 'Freeform > Bridge' support type to add a bridge support halfway up.
| cup.stl | 1.8MB | |
| Divider.stl | 4.0MB | |
| Inside_lid.stl | 203.4KB | |
| Spoon.stl | 1.4MB | |
| Spoon_bit.stl | 1.7MB | |
| Top.stl | 1.7MB |
![[K] Support De Paille (straw Holder) 3D Printer Model](https://cdn.3axis.co/assets/b2/d3/32/bd/b2d332bd-1810-4767-b8a5-5ceac9c446be/images/ee7eacb6-a962-4d0b-b7f3-2ca3fe215f71_thumb.jpg)