Yiga Windcleaver 3D Printer Model Free Download

Description Files (26)

Summary

The Windcleaver sword from Zelda videogames. It was modeled using reference images from the Breath of the wild version's of the sword used by Yiga Blademasters. It is approximately 1 meter long, once assembled.

A 1" wide red ribbon elastic (see below) was used to cover the hilt. Cut the elastic and pinch the middle to create the diamond shape. Use superglue to maintain shape. Dispose the strips around the hilt with a few milimeters of overlap.

The hilt in the picture was covered with https://www.amazon.ca/gp/product/B094FXF5M6/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Note** The sword in the picture was printed with a dual core Ultimaker S5 in order to avoid painting. If you have a single core printer, use the files prefixed by sc. and paint the inside of the blade white. If you have a dual core printer, use the files pefixed by dc.

Thanks to 12Monkeys for help with the blade design.

dc_blade_left_lower_black.stl	25.8KB
dc_blade_left_lower_white.stl	30.7KB
dc_blade_left_middle_black.stl	43.6KB
dc_blade_left_middle_white.stl	41.8KB
dc_blade_left_upper_black.stl	50.4KB
dc_blade_left_upper_white.stl	45.4KB
dc_blade_right_lower_black.stl	48.0KB
dc_blade_right_lower_white.stl	44.0KB
dc_blade_right_middle_black.stl	47.5KB
dc_blade_right_middle_white.stl	43.1KB
dc_blade_right_upper_black.stl	31.4KB
dc_blade_right_upper_white.stl	27.2KB
dc_merged_lower_middle_blade.3mf	211.8KB
dc_merged_upper_blade.3mf	148.2KB
guard.stl	194.4KB
hilt.stl	47.3KB
pin_blade.stl	17.5KB
pin_guard.stl	35.0KB
pommel.stl	2.6MB
sc_blade_left_lower.stl	56.4KB
sc_blade_left_middle.stl	85.3KB
sc_blade_left_upper.stl	95.7KB
sc_blade_right_lower.stl	92.0KB
sc_blade_right_middle.stl	90.5KB
sc_blade_right_upper.stl	58.6KB
yiga_crest.stl	239.8KB

Yiga Windcleaver 3D Printer Model

Summary

Tags

You might also like