This is yet another stackable planter set. Each layer have a small water reserve making the watering easier and more efficient, and the water communication hole between an element and the element below is eccentric so that the water doesn't dig a fast tunnel between one layer and the other after some time.
The pieces of the set snaps-in one into the other so that you can achieve the height you need. There are 3 types of elements :
Everything is compabible, you can mix as many elements as needed.
Does not require support, except the Pied.stl.
Diameter of the planter is 220mm to fit on the anycubic kossel print area.
| Bouchon.stl |
| Corps_v3_bas.stl |
| Corps_v3_haut.stl |
| Pied.stl |
| Spacer_bas.stl |
| Spacer_haut.stl |
