I made some changes to the great design of TheGoofy. I added holes to be able to put 6mm rods through the vise and be able to clamp it down without changing to much of the original design and printability. Based on philxings idea to be able to drive the vise using an electric driver I made my own modification to the center gear. This version should still work with philxings gear for the electric driver. I used his dimensions to remodel it in Fusion360.
I just added gears with connectors for 1/4", 3/8" square sockets and 1/4" hex bits.
| 14_Hex-Bit_Electric_Drive_Gear.stl | 804.0KB | |
| 14_Socket_Electric_Drive_Gear.stl | 963.8KB | |
| 38_Socket_Electric_Drive_Gear.stl | 2.3MB | |
| Base_A.stl | 854.9KB | |
| Base_B.stl | 844.8KB | |
| Center_Gear.stl | 1.0MB |
![Specimens With Gauge Length Five Times The Diameter [E8M] 3D Printer Model](https://cdn.3axis.co/assets/ae/bc/cf/35/aebccf35-03cd-4da1-992f-62420a3495a2/images/75f1d63f-1551-4a64-a171-fb8c6ea0e55e_thumb.jpg)
