Yet Another Hornet Trap With Easily Lure Replacement 3D Printer Model
The file 'Yet Another Hornet Trap With Easily Lure Replacement 3D Printer Model' is (stl) file type, size is 572.1KB.
The file 'Yet Another Hornet Trap With Easily Lure Replacement 3D Printer Model' is (stl) file type, size is 572.1KB.
This is yet another asian hornet (Vespa Velutina) trap. Sides are 15x15 so you don't have any issues with sides.
Modified ferrrader's cone with another bigger selective grid to allow escapement of insects other than Asian hornets. Used Alexsershu's desgin for the lower part where the lure can't be reached by the honets and insects, and is easily replaceable (1/3 grenadine, 1/3 vinegar and 1/3 beer or wine). Added little feet, and screwable hooks you can use to attach it somewhere with some rope. I used SuperPleccer to print the top screws to limit waste generation from supports by allowing it to print the overhang with the Arc algorithm (https://github.com/rvmn/SuperPleccer). Used mike_mattala's threads because I felt too lazy to design threads this time, and those threads are spot-on for me.
I encourage to put it in the freezer or to let the honets die from starvation beforme manipulating (but you are all big enough to learn how to manipulate hornets without getting stung).
You can print the top with transparent filament for better workings.
An alternative to this trap is Adamow's trap (https://www.thingiverse.com/thing:4786899), but this thing was made before I saw his model (stupid me) and is 100% printed
| Cote.stl | 476.4KB | |
| Couvercle_pot.stl | 104.6KB | |
| Patte.stl | 38.2KB | |
| Piege_FA_Cone.stl | 859.2KB | |
| PlancherV2.stl | 86.5KB | |
| Pot.stl | 72.0KB | |
| ToitV2.stl | 18.2KB | |
| Visse.stl | 46.4KB | |
| Visse_Cote.stl | 54.0KB | |
| Visse_toitV2.stl | 54.7KB |
