Yet Another Filament Sample 3D Printer Model
The file 'Yet Another Filament Sample 3D Printer Model' is (stl) file type, size is 101.7KB.
The file 'Yet Another Filament Sample 3D Printer Model' is (stl) file type, size is 101.7KB.
I have realized that there are quite a bit of difference between the colors of different filament brands. Opacity, intensity, tone, and florescence are some of the properties i have found differ between brands.
There are two zones, one large where you can write down the name of the filament and a small area with 0.1 mm, 0.2 mm, and 0.3 mm thick areas so you can compare how thin sections will look. The hole is 4 mm.
[7 of Aug 17]
Added a couple of models with 0.4 / 0.8 / 1.2 mm as well as 0.5 / 1.0 / 1.5 mm to match the wall thickness of common nozzles. Print with och close to 100% infill to get a realistic opacity. Also changed the hole size to 5mm. Leaving the old one up if you already used it and want your new ones exactly the same.
Designed with OnShape: https://cad.onshape.com/documents/b94e9ec9aee632c4fb8631e7/w/708a8fcb904cff13521875fb/e/dcfb36abf0dee5eefba083d8
| Filament_sample_-_Sample.stl | 101.3KB | |
| Filament_sample_-_Sample_0.1-0.2-0.3.stl | 101.3KB | |
| Filament_sample_-_Sample_0.4-0.8-1.2.stl | 101.3KB | |
| Filament_sample_-_Sample_0.5-1.0-1.5.stl | 101.3KB |
