Yet Another Allen Key T-handle 3D Printer Model
The file 'Yet Another Allen Key T-handle 3D Printer Model' is (3mf,stl) file type, size is 14.2MB.
The file 'Yet Another Allen Key T-handle 3D Printer Model' is (3mf,stl) file type, size is 14.2MB.
A definitely overengineered, but rather easy to print allen key handle.
Keep in mind, that being a bit careful tightening the screws is always a good thing and it's definitely easier to apply too much force with an additional leverage provided by this handle.
Available top sizes: 1.5, 2.0, 2.5, 3.5 and 4.0 mm.
| cap_1.5mm_2x.3mf | 502.4KB | |
| cap_1.5mm_2x.stl.stl | 809.6KB | |
| cap_2.0mm_2x.3mf | 507.6KB | |
| cap_2.0mm_2x.stl | 3.0MB | |
| cap_2.5mm_2x.3mf | 507.9KB | |
| cap_2.5mm_2x.stl | 3.0MB | |
| cap_3.0mm_2x.3mf | 512.2KB | |
| cap_3.0mm_2x.stl | 3.0MB | |
| cap_3.5mm_2x.3mf | 544.3KB | |
| cap_3.5mm_2x.stl.stl | 832.4KB | |
| cap_4.0mm_2x.3mf | 534.4KB | |
| cap_4.0mm_2x.stl | 812.1KB | |
| cap_universal_2x.3mf | 483.8KB | |
| cap_universal_2x.stl | 3.0MB | |
| t-handle_1.5mm_top.3mf | 355.8KB | |
| t-handle_1.5mm_top.stl | 519.7KB | |
| t-handle_2.0mm_top.3mf | 347.4KB | |
| t-handle_2.0mm_top.stl | 1014.4KB | |
| t-handle_2.5mm_all_parts.3mf | 771.3KB | |
| t-handle_2.5mm_top.stl | 1014.9KB | |
| t-handle_3.0mm_top.3mf | 347.8KB | |
| t-handle_3.0mm_top.stl | 1014.5KB | |
| t-handle_3.5mm_top.3mf | 360.2KB | |
| t-handle_3.5mm_top.stl | 525.7KB | |
| t-handle_4.0mm_top.3mf | 360.2KB | |
| t-handle_4.0mm_top.stl | 522.7KB | |
| t-handle_universal_bottom.stl | 651.2KB |
