Yennefer In Purple – Hueforge Print 3D Printer Model
The file 'Yennefer In Purple – Hueforge Print 3D Printer Model' is (hfp,stl) file type, size is 29.8MB.
The file 'Yennefer In Purple – Hueforge Print 3D Printer Model' is (hfp,stl) file type, size is 29.8MB.
Yennefer of Vengerberg - from the Netflix Witcher Season 3
Note: The roll of Fuschia colour that I have prints purple when it's a thin layer over black, hence why the print looks purple. If you have an actual purple filament, it will be safer.
The included stl file is for a 97x97mm print, however I printed it at 200mm x 200 mm. You can adjust this in your slicer but BE CAREFUL to NOT have 'Uniform Scale' tickedm otherwise it will also scale your z height and you don't want that!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Swap Instructions:
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
| yenpurple.hfp | 2.3KB | |
| yenpurple_Front_97x97.stl | 89.5MB |
