Yashica 44 (A) 35mm Framing Guide 3D Printer Model
The file 'Yashica 44 (A) 35mm Framing Guide 3D Printer Model' is (3mf,stl) file type, size is 22.6KB.
The file 'Yashica 44 (A) 35mm Framing Guide 3D Printer Model' is (3mf,stl) file type, size is 22.6KB.
This is an extremely simple frame guideline that can be left on top of the waist-level finder of the Yashica 44. It fits under the WLF when it's closed and should stay in place on its own. My intention when making this was to be able to visualize where the sprocket holes will be in the frame to help me fine-tune my compositions through the WLF when using a 35mm-converted Yashica 44.
I have the Yashica 44A, but I presume the WLF and focusing screen is the same between the various models, so it should work for all of them.
I've marked this as WIP since I haven't film-tested it yet. I should have some results soon.
I personally use this project to run 35mm film through my 44A: https://www.printables.com/en/model/251162-yashica-44-35mm-conversion-kit
Additionally, I use the spool spacers from this project on the takeup spool: https://www.thingiverse.com/thing:5376594
| Yashica_44A_35mm_Framing_Guide.3mf | 26.6KB | |
| Yashica_44A_35mm_Framing_Guide.stl | 3.6KB |
