Yamaha YXZ1000 Rear Speaker Enclosures 3D Printer Model
The file 'Yamaha YXZ1000 Rear Speaker Enclosures 3D Printer Model' is (stl,f3d) file type, size is 3.1MB.
The file 'Yamaha YXZ1000 Rear Speaker Enclosures 3D Printer Model' is (stl,f3d) file type, size is 3.1MB.
I wanted to build a better speaker box/enclosure for my yxz to replace the crappy wood ones I made years ago and this is what I came up with. This design uses a 6.5" speaker of your choice however because of the location it's still a tight fit so the speaker may or may not rub on the frame. If there's any interest, I could absolutely make a version for a smaller 5.25" speakers that i dont think would have any clearance issues. I also stuffed these with quilt batting from walmart to compensate for the lack of actual volume in the enclosure. All the screws used are m4x12 or 16. If you end up printing a set of these let me know how it goes and if you have any suggestions and/or requests on how they could be improved!
| Left_Enclosure.stl | 1.9MB | |
| Left_Top_Clamp.stl | 692.2KB | |
| Lower_Spacer.stl | 475.4KB | |
| Right_Enclosure.stl | 1.9MB | |
| Right_Top_Clamp.stl | 692.2KB | |
| YXZ_Speaker_Enclosure_v10.f3d | 1.4MB |
