This IKEA Lack enclosure can be fully printed with 1kg spool of PLA.
All the parts take about 4 days of printing with your Ender 3.
You need following additional parts to build YAILE:
1x 3mm x 442mm x 538mm | Acrylic Glas for the door
3x 10mm x 449mm x 540mm | Chipboard, white for the walls
50x Screws 13mm long
3x M4 Washer
2x M4 Screws 10 mm long
As damper i used a building protection mat from the local toolstore.
To expand the powercable from the PSU i used 4 Wago clamps and about 40cm of cable.
The filament tunnel needs to be glued together to get totaly fixed.
I WOULD LOVE TO SEE YOUR MAKES!
Edit 22.11.2020:
For those who need it: https://www.thingiverse.com/thing:4662241
Simple 2 holes bracket for "YAILE enclosure side panels"
| 1._riser_front_left_bottom.stl | 51.0KB | |
| 10._filament_tunnel_b.stl | 99.9KB | |
| 11._Base_for_Spoolholder.stl | 87.6KB | |
| 12._PSU_holder.stl | 68.1KB | |
| 13._hinge_door_bottom.stl | 66.9KB | |
| 14._hinge_door_top.stl | 66.9KB | |
| 15._Door_knob.stl | 336.1KB | |
| 16._hinge_door_for_6mm_acrylic_glas.stl | 62.9KB | |
| 17._hing_door_for_4mm_acrylic_glas.stl | 66.9KB | |
| 2._riser_front_left_top.stl | 51.0KB | |
| 3._riser_back_left_bottom.stl | 63.9KB | |
| 4._riser_back_right_bottom_with_cablehole.stl | 73.1KB | |
| 5._riser_back_left_top.stl | 63.9KB | |
| 6._riser_back_right_top.stl | 63.9KB | |
| 7._riser_front_right_bottom_for_door_-_support_needed.stl | 61.1KB | |
| 8._riser_front_right_top_for_door_-_support_needed.stl | 61.1KB | |
| 9._filament_tunnel_a.stl | 97.4KB | |
| YAILE_YET_ANOTHER_IKEA_LACK_ENCLOSURE_FULL.step | 25.4MB |
