Yagi Antenna (4G) 3D Printer Model
The file 'Yagi Antenna (4G) 3D Printer Model' is (STL) file type, size is 51.0MB.
The file 'Yagi Antenna (4G) 3D Printer Model' is (STL) file type, size is 51.0MB.
Rugged 3D printable Yagi antenna elements
Models were originally made for a telecommunications project for high wind rural areas to connect to 4G antennas (Example project described in this publication). But the 3D printable elements can be repurposed to make any other type of Yagi for the desired frequency. The elements are designed to be small but very resistant. They also are numbered to be easily identifiable.
The element diameter is 3.5mm and the boom diameter is 11mm
| 3_16_inch_screw_Oring.STL | 775.3KB | |
| cover_cap.STL | 1.6MB | |
| cover_cap_seal.STL | 618.8KB | |
| D1+B.STL | 8.9MB | |
| D2+B.STL | 9.1MB | |
| D3+B.STL | 9.3MB | |
| D4+B.STL | 8.9MB | |
| D5+B.STL | 9.2MB | |
| D6+B.STL | 9.2MB | |
| D7+B.STL | 8.9MB | |
| D8+B.STL | 9.3MB | |
| D9+B.STL | 9.2MB | |
| dipole_support_A.STL | 652.8KB | |
| dipole_support_B.STL | 18.4MB | |
| dipole_support_B_773Mhz.STL | 16.2MB | |
| dipole_support_top.STL | 1.0MB | |
| m3_screw_Oring.STL | 775.3KB | |
| N_connector_Oring.STL | 893.1KB | |
| R1+B.STL | 9.0MB |
