increases the HyperGel Cluch power from the original 150FPS to an estimated 170FPS.
step1: unscrew and remove the pump grip
step2: unscrew and remove the body cover
note: this is not the first time i have modded this blaster, and i am missing some parts because of a mod i did. when you take yours apart, you will have a few extra white parts above the piston assembly. you will need to remove them to install the spacer, and then you can put them back in or not. your choice.
step3: remove the white piston steadier
step4: put in the spacer as shown
step5: put it all back together
| spacer_1.stl | 262.1KB |
