XRC RC-2 Rear Suspension Top Arm Inner L/R – (Part No. 613007/XRC.613007) 3D Printer Model
The file 'XRC RC-2 Rear Suspension Top Arm Inner L/R – (Part No. 613007/XRC.613007) 3D Printer Model' is (stl) file type, size is 244.5KB.
The file 'XRC RC-2 Rear Suspension Top Arm Inner L/R – (Part No. 613007/XRC.613007) 3D Printer Model' is (stl) file type, size is 244.5KB.
This is a 3d printable replacement for the xrc rc-2s Rear Suspension Top Arm Inner L/R - (Part no. 613007/XRC.613007.) This isn't an exact 1 to 1 dimensionally accurate reproduction of the original part, this has been designed to be thicker since it's printed. You also don't need the old brass spacer from the original parts, that side was also made thicker/chunkier than the original.
There are 2 versions of this model, one with printed threads and another sized to take brass threaded inserts.
For the printed threads version, you only need one m5 by 30mm or 35mm long bolt for each one you print. (30's a tiny bit short, 35's a tiny bit longer and pretrudes from the part. Either length should work fine.)
For the threaded inserts version you'll need one M5x10x7 (10mm long, 7mm Outer Diameter,) one M8x8x10/M8x10x10 (8mm or 10mm long, 10mm Outer Diameter) threaded inserts and one M5 by 30mm or 35mm long bolt for each one you print.
EDITS
05/10/24 added print photos
| Top_Arm_Inner_613007_-_Printed_Threads.stl | 572.6KB | |
| Top_Arm_Inner_613007_-_Threaded_Inserts.stl | 72.6KB |
