XQ01 Mini Portable Spot Welder Enclosure 3D Printer Model
The file 'XQ01 Mini Portable Spot Welder Enclosure 3D Printer Model' is (stl) file type, size is 33.0KB.
The file 'XQ01 Mini Portable Spot Welder Enclosure 3D Printer Model' is (stl) file type, size is 33.0KB.
XQ01 Mini Portable Spot Welder enclosure
printed in ABS and then spray painted.
use 6S 3000F caps as input source.
upgraded wires, input wire is 6awg 16mm and output wire is 10mm
first print the enclosure, then align XT90 connectors and solder it to the board.
i add 14v TVS diodes which is optional.
to protect the display, cut a small piece from the original casing which is 2mm and fit that with adhesive from inside of the top part.
finally join enclosure with super glue, i didn't wanted to add external screws, which looks bad.
thank you
| SPOT_WELDER_Base.stl | 90.4KB | |
| SPOT_WELDER_top.stl | 72.0KB |
