A follow up on my previous Christmas Tree decorations, here's a set of them. The Angel is in two parts that snap together. You will want to print the wings with the halo pointing down toward the bed with supports. On the Rudolph ornament, if you pause at Z height of 4 mm and change the filament it will change the nose color (and a bit of the eyes). The sleigh was printed on its back with the front in the air on a raft with supports. The 3Dstars were oriented so that three of the points were touching the bed, with a raft and supports. The rest should print as they are. (The caged tree was actually designed so that the top tree star becomes the center cage's support.)
| 3DStar.stl | 226.9KB | |
| Angel_Body.stl | 30.0KB | |
| Angel_Wings.stl | 219.6KB | |
| CagedTree_repaired.stl | 1.8MB | |
| Drum_Ornament_repaired.stl | 1.0MB | |
| Rudolph.stl | 776.4KB | |
| Sleigh.stl | 39.2KB | |
| Star_Ornament_repaired.stl | 331.9KB |
