Xmas Tree 3D Printer Model
The file 'Xmas Tree 3D Printer Model' is (stl) file type, size is 191.0KB.
The file 'Xmas Tree 3D Printer Model' is (stl) file type, size is 191.0KB.
A nice Xmas tree that you can print instead of buying!
Stands around 40cm tall if you wish or you can make it only ~20cm tall. It has three sections so you can print just the top section of the tree, the top section with feet, the top and middle section or the top middle and feet to have quite a big tree.
I also made two different types of connectors so if you have filament to burn you can print the tree with 6 sections to each level OR you can use the 4 way connector and have a simpler tree.
I recommend printing the star is glow in the dark filament it makes it nice at night!
| 4_Way_Connector_Fixed.stl | 96.4KB | |
| 4_Way_Top_Cap_Fixed.stl | 13.1KB | |
| 6_Way_Conector_Fixed.stl | 169.4KB | |
| 6_Way_Top_Cap_Fixed.stl | 22.9KB | |
| Star_Fixed.stl | 6.6KB | |
| Tree_Middle_Section_Fixed.stl | 155.0KB | |
| Tree_Top_Fixed.stl | 260.2KB | |
| Tree_Trunk_Fixed.stl | 58.3KB |
