Based on a modified ambiance light with a realistic flamme and with a RGB led low consumption in the body of the candle.
The candle body has the photo of your choice as a lithophane. You will see it when the candle is switched-on.
The effect is really nice.
You will need:
a battery operated LED tealights candles with timer – 6 hours on and 18 hours off in 24 hours cycle for, indoor, or outdoor. The cheapest one are just fine (Ibought a box of 24 for 11€ on usual on-line shopping)
Depending of the model you find, if it is not the same the one I used, you may have to adapt a bit.
for example I used: https://www.amazon.de/dp/B01MDR8NGV/ref=pd_sbs_201_11?_encoding=UTF8&pd_rd_i=B01MDR8NGV&pd_rd_r=7d85c23b-9720-418d-934e-f80931dfc7d7&pd_rd_w=uQSgc&pd_rd_wg=3mWUw&pf_rd_p=184816e4-edb5-4587-8faf-776e0027d8d1&pf_rd_r=0NAT5GDNS9A93FG8WQZK&psc=1&refRID=0NAT5GDNS9A93FG8WQZK
a RGB led: RGB 5mm - Common Anode LED Clear.
one Screw
little wood support
little bit of a your Xmas three :)
Nice red ribbon for the knot
Candle unitary cost is around 0.90cts to 1€ :)
| CandleLight.pdf | 1.2MB | |
| supportCandle2.stl | 22.2KB | |
| traineau.stl | 1.2MB |
