XL750 Round Counter 3D Printer Model
The file 'XL750 Round Counter 3D Printer Model' is (stl) file type, size is 8.3KB.
The file 'XL750 Round Counter 3D Printer Model' is (stl) file type, size is 8.3KB.
Simple print to attach to the chute on a dillon XL750 and counts rounds as they drop through.
Printed in PLA
The break beam sensors have proven very effective. I havent been able to get it to skip a count in any realistic tumbling or bouncing I could come up with.
You will need an arduino or similar and a screen. Ardunio can directly power these sensors.
I built in a 75ms non blocking delay in programming to avoid double counts since its reaction time is very fast however i dont know if its necessary or not. I used INPUT_PULLUP on the arduino pinmode setup as well since the documentation suggested it necessary
Break beam sensor used:
https://www.amazon.com/dp/B01BU6YBWU
details from adafruit: https://www.adafruit.com/product/2167
| Round_Counter_Mount.stl | 42.9KB |
