Xiegu G106 Kick Stand 3D Printer Model
The file 'Xiegu G106 Kick Stand 3D Printer Model' is (stl) file type, size is 45.2KB.
The file 'Xiegu G106 Kick Stand 3D Printer Model' is (stl) file type, size is 45.2KB.
A simple kick stand for the Xiegu G106 providing a 30mm rise. You will require 2 M3 Nuts, 2 M3 washers and 2 M3x8 Machine screws.
The M3 Nuts should be installed first from the bottom and will be captured in place. Next install the mount to the radio using the existing screws from the rubber feet. Finally install the screws in the stand using washers to help prevent the screws loosening.
August 2024 Update
Added Medium (+10mm) and Long (+20mm) stands to increase high. If using the long stand I suggest using the rear bumper also. You will require 2x M3x6 screws. The factory screws for the feet can be used to screw the feet to the bumper.
Enjoy!
| Long_stand.stl | 41.6KB | |
| Medium_stand.stl | 42.1KB | |
| Mount.stl | 32.3KB | |
| Rear_bumper.stl | 52.2KB | |
| Stand.stl | 47.0KB |
