Hello and welcome to my hopefully growing console boxes.
I use EU normed boxes so you can build them easily at home. Last picture attached for reference.
Here we have the xbox original/classic in a 3d printed holder accompanied by 2 normal controllers, the AV cable and the power cord ready to be used again.
The controller cables haev enough space to just be dumped next to the controllers, despite that i found that behind the console is enough space to neatly pack them behind it if you are, unlike me a tidy person. My HDMi Adapter also has space with the controller cables if you own one.
The whole assembly was printed on my k1 Max in 4 parts and just pressfits into the box but gluing it to the ground or maybe even have screws isnt such a bad idea if you pull on the cables sometimes like me.
I havent tested printing it with smaller printers, if you are interested i could break it apart in smaller packages.
Regards
espi
Hope you enjoy
| Body_1.stl | 2.8KB | |
| Body_2.stl | 121.6KB | |
| Body_3.stl | 365.6KB | |
| Body_4.stl | 214.3KB |
