IMPORTANT! When you print it and insert batteries - check if they start warming up when you turn controller on to see if they're shorting. FIRE HAZARD! You can use capton tape to isolate battery connector from inner parts.
Alternatively you can mod the model adding those missing details, but I thought those walls will be too fragile to hold the tension: https://imgur.com/a/4LXYuGn
Took housing model from grabcad by Serge Gavrilov and poked a few holes. One of the versiohs has a hole for headphones (will need to be drilled or remodeled to fit headphones in or you can try a version with a larger hole which I didn't test), another has my estimation of the size and position which may be wrong but most likely won't require post processing.
For some reason it was super hard to find a barebones unmodded model on the web, so adding my own mod here ;-P
| battery-patch-unfinished.stl | 127.8KB | |
| Xbox_One_Backplate_Electronic_scan+headphones.stl | 48.4MB | |
| Xbox_One_Backplate_Electronic_scan+headphonesLargerHole.stl | 48.4MB | |
| Xbox_One_Backplate_Electronic_scan.stl | 48.5MB |
