X47 B – RC EDF JET – Ducted Fan – Prototype – Aircraft 3D Printer Model
The file 'X47 B – RC EDF JET – Ducted Fan – Prototype – Aircraft 3D Printer Model' is (stl) file type, size is 4.4MB.
The file 'X47 B – RC EDF JET – Ducted Fan – Prototype – Aircraft 3D Printer Model' is (stl) file type, size is 4.4MB.
This is my Prototype from the Military UCAV Drone X47B.
Greetings from Germany to all of you, stay healthy :-)
Wingspan: 75 cm
Lenght: 45 cm
MK2 Parts are optional! They are created for more air intake surface.
What you need (my Setup):
I print the wing parts without infill, without support and without raft.
All parts normaly do not need a raft, no infill and only for overhanging parts like the hull sections you need support. Ask if you have questions ;)
At the moment it has with Lipo, all electronics and fully assembled ca. 700 g weight.
| air_intake_optional.stl | 19.3KB | |
| akkufach_teil1.stl | 891.8KB | |
| akkufach_teil2.stl | 627.7KB | |
| edf_tube_back.stl | 71.8KB | |
| fuselage_top_boxes_optional.stl | 48.1KB | |
| Hull_2_newest.stl | 988.5KB | |
| Hull_3.stl | 777.0KB | |
| Hull_End_Tailnew_repariert.stl | 127.0KB | |
| Hull_Front_Nose.stl | 754.2KB | |
| Hull_Front_Nose_mk3.stl | 795.8KB | |
| hull_nose_mk2.stl | 622.1KB | |
| hull_part2_mk2.stl | 1.1MB | |
| hull_tail_mk2.stl | 788.2KB | |
| optional_winglets_left.stl | 117.8KB | |
| optional_winglets_right.stl | 117.9KB | |
| rudder_left_100_infill_no_support.stl | 196.3KB | |
| rudder_right_100_infill_no_support.stl | 196.2KB | |
| Tail_Outlet.stl | 480.5KB | |
| tail_tip_mk2.stl | 190.7KB | |
| wing_left_part1.stl | 661.6KB | |
| wing_left_part2.stl | 211.8KB | |
| wing_part_1.stl | 267.6KB | |
| wing_part_2.stl | 267.6KB | |
| wing_right_part1.stl | 661.6KB | |
| wing_right_part2.stl | 211.8KB |
