Incom T-65 X-wing starfighter.
Features:
Every part built for printing.
Detailed cockpit.
Articulated S-foils with smooth synchronous motion.
S-foils lock open or closed.
Swappable open or closed landing gear.
Removable Astromech.
S3D Factory file for parts that require supports
The nose may be difficult to print from slicers that lack customizable supports. I have included a version with solid windows that is easier to print
Sand can be found here: https://www.thingiverse.com/thing:2964476
Edit June 4, 2018: Updated cockpit in XWing_Nose.stl to properly scale the seat.
Note - XWing T65 Solid.stl is not meant for printing. It is just a reference view after assembly.
| XWing.factory | 954.2KB | |
| XWing_AstroMech_R2_Rolling_wo_support.stl | 112.2KB | |
| XWing_AstroMech_R2_wo_support.stl | 99.3KB | |
| XWing_Body_wo_support.stl | 245.7KB | |
| XWing_Front_Gear_Door_Closed.stl | 8.0KB | |
| XWing_Front_Gear_Door_Open.stl | 38.7KB | |
| XWing_Front_Gear_wo_support.stl | 48.2KB | |
| XWing_Laser_x4.stl | 100.0KB | |
| XWing_Nose_Closed_Canopy_fixed.stl | 216.5KB | |
| XWing_Nose_v2.stl | 1.1MB | |
| XWing_Pivot_1.stl | 254.6KB | |
| XWing_Pivot_2.stl | 250.9KB | |
| XWing_Pivot_Brace_wo_support.stl | 34.4KB | |
| XWing_Pivot_Cap_x2_wo_support.stl | 15.2KB | |
| XWing_Pivot_Sync_Lever_wo_support.stl | 9.3KB | |
| XWing_Port_Gear_wo_support.stl | 45.6KB | |
| XWing_Port_Lower_Intake_Closed.stl | 238.3KB | |
| XWing_Port_Lower_Intake_Open.stl | 282.9KB | |
| XWing_Port_Upper_Intake.stl | 293.1KB | |
| XWing_Rear_Cap_wo_support.stl | 137.1KB | |
| XWing_Starboard_Gear_wo_support.stl | 45.6KB | |
| XWing_Starboard_Lower_Intake_Closed.stl | 243.5KB | |
| XWing_Starboard_Lower_Intake_Open.stl | 286.9KB | |
| XWing_Starboard_Upper_Intake.stl | 249.2KB | |
| XWing_T65_Solid.stl | 4.5MB | |
| XWing_Wing_1_x2.stl | 542.2KB | |
| XWing_Wing_2_x2.stl | 539.7KB |
