New stronger landing gear base is made. It is good for Tarot retractable landing gear servo and 16mm OD carbon tube.
Added a voltage monitor and a battery charge plug in order to charge the battery without take it out of the quad. These can be down loaded at link below.
Test flight again more stable
https://www.facebook.com/ricky.cheung.94043/posts/1132544960101168
Some parts are modified for saving time and also more stronger.
After few months testing, I upgraded and modified some parts and come up with V2.0. There are two models, one is X-QUAD-W and other is X-QUAD-X. If anybody interested, please do let me know. This time have no free download files and got to pay a little as energy exchange. We also can print it for you if you got no 3d printer.
Thanks
Ricky
Another training flight at home
https://www.facebook.com/ricky.cheung.94043/videos/1069162489772749/
I made first test flight at home with a training device as my control is poor. https://www.facebook.com/ricky.cheung.94043/videos/1061789310510067/
A GPS cap was added for those people don't got GPS antenna.
A LED replacement was added for people who don't have the LEDs.
This is the third design and printed by Kossel 3d printer. Using Dji Naza V2 fright
control unit. In order to complete this project, you needs carbon tubes and parts as follow;
I used the motor mount (Tarot 16mm OD, TL68B26/TL68B25 690PRO) in hand but actually you can be printed as you wish.
10 mm OD LED x 8 pcs ( 2 white in the front as head light, 2 red at the back as tail light, 2 blue on top of camera as for identical, 1 red and 1 green at the bottom with flashing ) It is very common to find in the market for these kind of LED.
Other parts are up to yourself, all completed craft should not be more than 3 kg and that can fly more than 30 min or an hour.
| 3_antennaDome_04.STL | 118.9KB | |
| 3_cameraFrame_01.STL | 248.4KB | |
| 3_camHolder_04.STL | 37.4KB | |
| 3_controllHousing_004.STL | 307.5KB | |
| 3_fixLegBase_00.STL | 89.5KB | |
| 3_fixLegHingeL_01.STL | 24.5KB | |
| 3_fixLegHingeR_01.STL | 24.5KB | |
| 3_footCap_04.STL | 31.6KB | |
| 3_foot_03.STL | 27.1KB | |
| 3_frontCamBox_03.STL | 35.6KB | |
| 3_frontHousing_04.STL | 185.3KB | |
| 3_GPSAntenaCap_01.STL | 178.8KB | |
| 3_LEDcap_00.STL | 46.9KB | |
| 3_legHolder_a_03.STL | 15.3KB | |
| 3_legHolder_b_03.STL | 47.0KB | |
| 3_pmuCover_00.STL | 11.6KB | |
| 3_rearHousing_02.STL | 222.5KB | |
| 3_rodEndCap_00.STL | 58.7KB | |
| 3_rodHingeLeft_03.STL | 61.2KB | |
| 3_rodHingeRight_03.STL | 61.2KB | |
| 3_rodHinge_a_06.STL | 39.5KB | |
| 3_rodHinge_b_06.STL | 49.2KB | |
| 3_tailCover_04.STL | 149.6KB | |
| 3_topBack_01.STL | 217.3KB | |
| 3_topFront_05.STL | 295.0KB | |
| 3_tvHousing_03.STL | 91.4KB |
