"Draw Right" is for Mussy's X-Bow V2.0 Ultimate Edition - using 8mm latex bands.
Allows for straight and repeatable draws of the bands. Up and Down, Left and Right.
Adjustable to different arrow lengths. Shown is my personal overall length of 29in" tip to nock.
Attaches to last notch on the top and bottom, side picatinny rails.
3x M4 screws and nuts (sub the nuts for M4 heat sets, works and won't have to worry about losing your nuts)
Frog Legs should be printed in a strong PLA, PETG or ABS/ASA to prevent warping.
8/26/2024: Now with a High Vis Toucher Mod. Will enable you to see when the band is touching the top and bottom band post much easier. Print the inserts in high visible contrasting color to the bands and the post.
***NOT INTENDED AS A STAND OR TO WRAP THE LATEX BAND AROUND THE TOUCH POINTS. IT CAN SNAP OR BEND IT. ALWAYS WEAR SAFETY GLASSES. MARK YOUR ARROW SHAFTS 1 INCH FROM THE ARROW END IN A BRIGHT COLOR TO HELP PREVENT A DANGEROUS OVERDRAW SITUATION, BY ALLOWING YOU TO CLEARLY SEE WHEN THE MARK IS AT THE WHISKER BISCUIT.
| Draw_Right.stl | 1.7MB | |
| Draw_Right_Rails.stl | 2.4MB | |
| High_Vis_Touchers_Mod.stl | 2.9MB |
