Wym 3D Printer Model
The file 'Wym 3D Printer Model' is (STL,zip,max) file type, size is 38.0MB.
The file 'Wym 3D Printer Model' is (STL,zip,max) file type, size is 38.0MB.
This is developed to study foldable wing structure for dragon.
It is small and 'Extremely difficult' to make as well it's experimental wing. due to it's small size, some of joints are easy to pop out from soket.
try at your risk, Recommened to Scale up from 120% to 200% and build part by part than print entrie set although it's providede to minimize the risk.
it's inpired by beautiful Dragonology by Mag-net (https://www.thingiverse.com/thing:2671240)
and mostly take reference from Skyrim dragons.
articulation design trait was inherited from my other two dragons.
march 13, 2018 // Enter revise to insert Ball - Soket Tolerance. re-sizing
| Body_001.STL | 1.7MB | |
| Body_002.STL | 195.2KB | |
| Body_003.STL | 1.8MB | |
| Foot.STL | 296.2KB | |
| Head.STL | 2.3MB | |
| Head_B.STL | 2.5MB | |
| Leg_001.STL | 744.0KB | |
| Leg_002.STL | 262.1KB | |
| Leg_003.STL | 218.6KB | |
| Neck_00.STL | 194.4KB | |
| Neck_01-06.STL | 1.2MB | |
| Neck_07-11.STL | 1022.2KB | |
| Neck_12-16.STL | 979.2KB | |
| Revised_STL.zip | 8.5MB | |
| SET_01.STL | 23.3MB | |
| SET_02.STL | 4.4MB | |
| Tail_01-05.STL | 1.0MB | |
| Tail_06-11.STL | 1.3MB | |
| Tail_12-16.STL | 1.1MB | |
| Tail_17-19.STL | 698.2KB | |
| Tail_Tip.STL | 250.9KB | |
| Wing_001.STL | 715.9KB | |
| Wing_002.STL | 273.0KB | |
| Wing_003.STL | 1.1MB | |
| Wing_Cutting_Frame_3.STL | 29.8KB | |
| Wing_Hand.STL | 1.3MB | |
| Wing_Limb_A.STL | 228.7KB | |
| Wing_Limb_B.STL | 228.7KB | |
| Wing_Limb_C.STL | 228.5KB | |
| Wing_Limb_D.STL | 88.9KB | |
| Wing_Limb_D_Tip.STL | 126.6KB | |
| Wing_Limb_End_Tip.STL | 115.4KB | |
| Wing_Limb_End_Tips.STL | 922.7KB | |
| Wym_2011.max | 26.1MB |
