WuuYA Tree 3D Printer Model
The file 'WuuYA Tree 3D Printer Model' is (stl) file type, size is 3.6 MB.
The file 'WuuYA Tree 3D Printer Model' is (stl) file type, size is 3.6 MB.
: 3D PRINT 18 parts:
print every part six times
original size need a 230mm X 230mm printbed so on Ender 3/5 or bigger it is possible
optimized for 1mm nozzle because of overlap within the print
min. 0.8mm nozzle
In Prusa Slicer use spiral mode or 1 line on the outer and a lot bottomlayer with 0 infill and draw the vertical seam on one edge for slicing
can recommend PETG, oktoprint with klipper and a Red Lizard V1 hotend with highflow
so i print 18 parts in around 34 hours for one ring
i used foldback clips to join the parts together
: CONCRETE:
cooking oil works also to separate concrete from petg parts
use water-resistant concrete if used in cold areas
AND i use a steel chain in the middle, can prevent apart-breaking.
: PLANTS :
not every Plant will work
can recommend small plants
use a big trivet with 34cm radius to protect the WuuYA Tree from ants and snails with a moat/ring of water
| wuuya_tree_a.stl |
| wuuya_tree_a_plain.stl |
| wuuya_tree_beta_inner_v0.9.stl |
| wuuya_tree_beta_outer_v0.9.stl |
| wuuya_tree_beta_rail_v0.9.stl |
| wuuya_tree_i.stl |
| wuuya_tree_socle_a.stl |
| wuuya_tree_socle_i.stl |
| wuuya_tree_socle_u.stl |
| wuuya_tree_u.stl |
