WS2811 Jason Mask V2 3D Printer Model
The file 'WS2811 Jason Mask V2 3D Printer Model' is (stl,xmodel) file type, size is 4.3MB.
The file 'WS2811 Jason Mask V2 3D Printer Model' is (stl,xmodel) file type, size is 4.3MB.
This version has been remixed to remove the "mask holder" empty spaces and replaced with pixel holes to give a more seperated look for the mask and make the machetes appear behind it.
This is a prop for WS2811 LED lights. It holds 164 pixels.This has been split to fit on a standard Ender 3 bed. There are 4 bigger parts that will print on a slighty larger bed so those have been included as well. If you are printing on a 220x220 bed then use the "split" version of the files, otherwise just use the numbered version. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I adjust the Z height on the file to about 7.5mm. Adjust this to what you would like to have for thickness. I have included the xlights xmodel in the download.
| JasonMasked-1-Split1_V2.stl | 713.8KB | |
| JasonMasked-1-Split2_V2.stl | 311.7KB | |
| JasonMasked-10_V2.stl | 977.6KB | |
| JasonMasked-11_V2.stl | 914.6KB | |
| JasonMasked-12_V2.stl | 599.1KB | |
| JasonMasked-1_V2.stl | 863.4KB | |
| JasonMasked-2-Split1_V2.stl | 762.8KB | |
| JasonMasked-2-Split2_V2.stl | 387.4KB | |
| JasonMasked-2_V2.stl | 947.8KB | |
| JasonMasked-3-Split1_V2.stl | 359.8KB | |
| JasonMasked-3-Split2_V2.stl | 123.7KB | |
| JasonMasked-3-Split3_V2.stl | 181.7KB | |
| JasonMasked-3_V2.stl | 611.7KB | |
| JasonMasked-4_V2.stl | 654.6KB | |
| JasonMasked-5_V2.stl | 807.7KB | |
| JasonMasked-6-Split1_V2.stl | 576.1KB | |
| JasonMasked-6-Split2_V2.stl | 144.5KB | |
| JasonMasked-6-Split3_V2.stl | 207.3KB | |
| JasonMasked-6_V2.stl | 782.1KB | |
| JasonMasked-7_V2.stl | 734.2KB | |
| JasonMasked-8_V2.stl | 1.3MB | |
| JasonMasked-9_V2.stl | 1.0MB | |
| JasonMaskV2_2.xmodel | 278.9KB |
