WS2811 Jason Mask 3D Printer Model
The file 'WS2811 Jason Mask 3D Printer Model' is (stl) file type, size is 34.7MB.
The file 'WS2811 Jason Mask 3D Printer Model' is (stl) file type, size is 34.7MB.
Click here for V2 of this prop:https://www.thingiverse.com/thing:6551027
This is a prop for WS2811 LED lights. It holds 158 pixels.This has been split to fit on a standard Ender 3 bed. There are 4 bigger parts that will print on a slighty larger bed so those have been included as well. If you are printing on a 220x220 bed then use the "split" version of the files, otherwise just use the numbered version. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. Although the files are thicker, I adjust the Z height on the file to about 7.5mm. Adjust this to what you would like to have for thickness. I have included the xlights xmodel in the download.
| JasonMask-1-1Split.stl | 40.8MB | |
| JasonMask-1-2Split.stl | 4.7MB | |
| JasonMask-1.stl | 3.2MB | |
| JasonMask-10.stl | 1.9MB | |
| JasonMask-11.stl | 1.7MB | |
| JasonMask-12.stl | 1.3MB | |
| JasonMask-2-1Split.stl | 15.0MB | |
| JasonMask-2-2Split.stl | 5.0MB | |
| JasonMask-2.stl | 5.3MB | |
| JasonMask-3-1Split.stl | 614.7KB | |
| JasonMask-3-2Split.stl | 762.8KB | |
| JasonMask-3.stl | 1.7MB | |
| JasonMask-4.stl | 3.4MB | |
| JasonMask-5.stl | 3.1MB | |
| JasonMask-6-1Split.stl | 829.0KB | |
| JasonMask-6-2Split.stl | 602.4KB | |
| JasonMask-6.stl | 1.7MB | |
| JasonMask-7.stl | 12.5MB | |
| JasonMask-8.stl | 3.2MB | |
| JasonMask-9.stl | 3.0MB |
