WS2811 Biohazard 3D Printer Model
The file 'WS2811 Biohazard 3D Printer Model' is (xmodel,stl) file type, size is 12.9MB.
The file 'WS2811 Biohazard 3D Printer Model' is (xmodel,stl) file type, size is 12.9MB.
This is a prop for WS2811 LED lights. It holds 75 pixels.This has been split to fit on a standard Ender 3 bed or there are 2 "big" files or even 1 "full" file if your printer bed is big enough. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I adjust the Z height on the file to about 7.5mm. Adjust this to what you would like to have for thickness. I have included the xlights xmodel in the download.
| Biohazard.xmodel | 529.7KB | |
| Biohazard_Triangle-1.stl | 4.2MB | |
| Biohazard_Triangle-2.stl | 1.7MB | |
| Biohazard_Triangle-3.stl | 4.3MB | |
| Biohazard_Triangle-4.stl | 3.0MB | |
| Biohazard_Triangle-5.stl | 464.2KB | |
| Biohazard_Triangle-Full.stl | 10.4MB | |
| Biohazard_Triangle_Big-1.stl | 5.7MB | |
| Biohazard_Triangle_Big-2.stl | 13.2MB |
