Wrx Funnel Cap 3D Printer Model
The file 'Wrx Funnel Cap 3D Printer Model' is (stl) file type, size is 54.3KB.
The file 'Wrx Funnel Cap 3D Printer Model' is (stl) file type, size is 54.3KB.
This is an add on to @nickboers (https://www.thingiverse.com/thing:3925405) Subaru oil funnel. It is a cap that one of the commenters requested to stop the oil from dripping. I used a 0.2 resolution, 10% zigzag infil, no supports were used, and a brim of 5mm. Just because of the nature of 3d printing, you will have to clean up the threads and brim, I found that the cap was difficult to thread on from the threads not being perfectly smooth so I just twisted the cap back and forth a few times every half rotation to kind of "chase the threads". That helped fully seat the cap and I tested with water and found zero leaks. Also, don't mind my multicolored funnel, the 1st print failed in the last 30 minutes of a 14hr long print so I printed the final portion in pink and glued it on.
| WRX_Funnel_Cap.stl | 136.8KB |
