Wrist Mounted Crossbow Toy (Reupload) 3D Printer Model Free Download

Description Files (13)

Summary

This is a reupload of my "Wrist Mounted Pen Cartridge Crossbow" since the original page now leads to a 404 error.

Demonstration Video

I originally designed this as a summer project but it came out better than I had expected so I decided to share it. This wrist mounted repeating crossbow fires empty pen cartridges from Pilot G2 and Frixon pens. Printable ammo types are also included however only the blunt ones will be available on Thingiverse in order to follow their community guidelines. They don't work as well as the pen cartridges but they do the job. Just make sure to print them horizontally so they don't break. It has a magazine capable of holding up to 5 rounds and a drawstring puller to aid in cocking it. It's not super powerful so you can use it indoors if you are cautious. I have personally shot my hand point blank with the BLUNT ammo and was completely fine. Don't do this if you use anything with a pointed tip.

You will also need a few different pieces of hardware to assemble the crossbow. M4 screws, washers, springs, string, and something to use as straps such as Velcro. The full list of parts needed as well as a step by step assembly guide and troubleshooting advice are all located in the READ ME file.

Be responsible and have fun.

Blunt_Bolt.STL	18.4KB
Crossbow_Arm_Print_2.STL	31.3KB
Crossbow_Base.STL	349.2KB
Crossbow_Drawstring_Pull.STL	192.9KB
Crossbow_Finger_Ring.STL	497.5KB
Crossbow_Magazine.STL	82.2KB
Crossbow_Magazine_Lid.STL	70.4KB
Crossbow_Main_Left.STL	77.6KB
Crossbow_Main_Mid.STL	45.0KB
Crossbow_Main_Right.STL	77.7KB
Crossbow_Small_Finger_Ring.STL	476.8KB
Crossbow_Trigger.STL	98.0KB
READ_ME.txt	10.9KB

Wrist Mounted Crossbow Toy (Reupload) 3D Printer Model

Summary

Tags

You might also like